Coup v. McConway & Torley Co.
Opinion of the Court
This appeal is from a decree dismissing a bill of the appellant, wherein the appellees were charged with infringement of patent No. 401,775, dated April 23, 1899, which was issued to John Coup for a car coupling. The claims involved are:
“(1) In a car coupler of the Janney type, a drawhead pivotally secured to the drawbar outside of the framing of the car, and a swinging hook secured to one of the lateral extensions of the head, in combination with a locking device, substantially as described.
“(2) In a car coupler of the Janney type, a drawbar having upper and lower projecting jaws at its front end, a drawhead having seats or recesses to receive said jaws, and a pin for securing said parts, in combination with a swinging hook secured to one of the lateral extensions of the head, and a locking device, substantially as described.”
The learned judge of the court below thought that the validity of the patent was open to grave question, and in this we quite agree with him; but, as he rested his decision solely upon the ground of noninfringement, and on that ground satisfactorily vindicated it, no other point need now be determined, nor anything be added to his discussion of the case. (C. C.) 127 Fed. 351.
It plainly appears from the specification that the primary concep
“In it [the alleged infringing device] we find a drawhead of the Janney type pivotally connected to a 'central drawbar. But the joint is one which, unlike Coup’s, does not ‘allow the drawhead to swing freely laterally in the ■drawbar.’ Such free lateral swinging of the drawhead is restrained in both ■directions by auxiliary side bars, whose spiral spring attachments serve both to retard such limited movement, and, when pressure is removed, draw the head back to a central, normal position. The blow of coupling cars is distributed to all three stems, and is cushioned by their respective springs. We cannot hold the respondents to infringe in such construction. It is true both devices accomplish the same result in one respect — that is, adjustment to curve travel — but in doing so Coup made use of a combination composed of known elements, and one of those elements was a free joint. While the respondent uses a joint which is free to the extent of allowing adjustment to curve travel, it is, however, nonfree and self-centralizing, and this for functional purposes. In head centralizing it accomplishes -an object which was recognized in the art before Coup, and which he did not see fit to point out or claim in his patent. When he chose to accomplish his object by the use of a free joint, and when a limited or nonfree joint had been used in the prior car-coupling art, it is quite clear that he could not ■cover every form of joint, and preclude the public from using any known form of a nonfree joint in combination to accomplish the same purpose. * * * The nonfree joint of the respondents is a development on different lines from the free joint of Coup, and is another and permissible means to obtain adjustment to track curvature.”
The decree is affirmed.
Reference
- Full Case Name
- COUP v. McCONWAY & TORLEY CO.
- Status
- Published