Wellman v. Blood
Opinion of the Court
The first interference declared In this case was that of the claim or application for a patent of said Blood and the patent of said Horace Woodman for improvements in machinery for cleaning top cards of carding machines; during the pend-ency of which, and after certain depositions and proof taken and returned preparatory to the trial of the issue between said first-mentioned parties, the application of the said Wellman was made; and before any decision as to priority, an interference was declared between the said Wellman and the said two other parties, and the time of trial appointed for the 30th of May (afterwards extended to the 4th June. 1835). Before said day of hearing, said Wellman, within the time limited by the forty-third rule of said office, applied to the commissioner, upon affidavit, for an extension of the time to complete the taking of his testimony. The grounds stated in the affidavit were deemed insufficient, and the application was refused.
Upon the trial of which issues the commissioner decided: First. That the interference between the respective parties was properly declared, and involved a combination of mechanism for elevating the card and stripping it, by the motion derived from a cam or cams on the shaft of the card cylinder and the intermittent movement of the lifter and stripper-frame card, to card back and forth from one side of the card to the other. Second. That George Well-man was properly refused a postponement of the day of hearing, because he did not state in his affidavit any particular facts material to show the priority of his invention which he could have proved by such postponement, but merely that he was advised that he ought to take additional evidence, and because he did not state what diligence he had used to procure testimony pending the interference. Third. That the testimony of Woodman was properly admitted, though the counsel of Blood gave notice to the office on the day of hearing that they objected to its admission for defect of notice; because counsel did not give notice of their objection to Woodman in the time required by the ninety-seventh rule of the rules and directions for proceedings in the patent office; and because to have refused to receive and hear his evidence would have been a surprise to Woodman, which it seemed was the object of the ninety-seventh rule to prevent; whereas, if the required notice had been given, he would have had an opportunity to retake his testimony. Fourth. That the evidence of L. Cutter, a witness for Blood, was properly received, although objected to by the counsel for Woodman on the ground of the discrepancies between his deposition in this interference and the interference previously declared between Blood and Woodman, because on reference to the deposition of Cutter given in the interference between Blood and Woodman it does not appear that the discrepancy is such as to throw a cloud on his credibility, but was merely such as might have been the result of a defect of memory. Fifth. That from the testimony it appears that Samuel Blood was the first and original inventor of the combination presented in his claim, and as such is entitled to a patent for the device as combined and applied and claimed by him in his application of the 10th of November, 1854.
Wellman appealed from this decision, and assigns for the reasons of his appeal: First. Because reasonable and sufficient time was not allowed to him to obtain all his material evidence to establish the date of his own invention and to show mistake or fraud in the dates of the drawings referred to in the evidence taken by said Blood and Woodman. Second. Because the commissioner based his decision, in part, upon evidence taken in a previously-declared interference between said Blood and Woodman, without any opportunity to said Wellman for cross-examination. Third. Because the commissioner, in coming to his decision, used a part only, and not the whole, of the evidence taken by Blood and Woodman in said previous interference between them. Fourth. Because the decision of the commissioner that said Blood was the first and original inventor of the thing claimed by him in his' application is against the weight of the legal evidence.
The commissioner has laid before me the original papers and the whole evidence in the
With respect to the reasons of appeal which raise the preliminary questions — granting or refusing further time upon the affidavit of the party stating the grounds of his application— it is a matter left to the sound exercise of discretion by the commissioner, and from which no appeal lies, unless in case of gross abuse, which is not to be presumed.
With respect to the objection to the admissibility of a portion of the testimony, it will be duly regarded in the further investigation of the case. I proceed to consider the merits of the issues between the parties; and that the evidence may be duly applied and appreciated, it will be necessary to look to the specifications and see what is the specific thing.
Wellman states, in substance, his to be: (1) A combination of mechanism for lifting and stripping the card by motion direct from cams or the shaft of the card cylinder. (2) The intermittent movement of the lifter and stripper from card to card, back and forth, from one end of the card to the other. The end or effect intended by each of the parties by their improvements appears to have been the same: First. The question will be whether the inventions are substantially the same; and if so — Second. Who was the prior and original inventor. To decide which questions it will be necessary to examine the testimony.
Wellman’s first, and one of his principal witnesses, is M. C. Bryant, who is admitted to be a machinist of talent and reputation. He states that he has been accustomed to examine and compare patented machinery and inventions; that he is an expert; that he made the drawing marked Exhibit “A” for Wellman in April, 1852; that it represents a modification of the stripping apparatus which he saw the model of, at that time, made by Mr. Wellman. He gives a- particular description of the several parts of the drawing. At the time he made it he had knowledge of a model of a stripping machine, and since then he has had knowledge of Wellman’s stripping machine, which was made in accordance with that model. A particular description of the several parts of said drawing is then given by the witness. He is required by a cross-interrogatory to state from what information he made the drawing. His answer is that he was invited by Mr. Hinckley, the superintendent of the Merrimac Company Mills, to go to his counting-room and see a model of a card-stripping apparatus which he said was made by Mr. Wellman. He went and saw it (the model). He was asked by Mr. Hinckley his opinion concerning it. Witness said that it had too much top-hamper, but that he thought it might be easily reduced. A few days after, he saw Mr. Wellman and told him the same in substance. He requested witness to make a drawing with such modifications, and offered to pay him for his trouble. He made the drawing and gave it to him. He offered to pay him. He refused to take any pay, considering the trouble on his part of making the change of little importance. He is further asked, on cross-examination, whether he remembered the machine afterwards built by or for Mr. Wellman, and of which witness had spoken, and how, if at all, did it differ in the last-mentioned respect (“how were the parts shown for moving the frame which carried the stripping apparatus”) from the model? He answered: “I think there was no essential difference.” It may be inferred from the testimony of Bean that he began to work on said model in February, 1852. Witness, in stating the difference between the model sent to Washington and the one then shown him, says the latter is driven by a worm instead of a pinion gear.
John S. Bradshaw, the next witness on the part of Wellman, worked upon the two models just alluded to; received orders to work on the second on the 12th of June, 1852; finished it previous to the 23d of November, 1852. He states that he has been accustomed to make models for machines for patents; that he has invented and patented several machines, and has been examined as an expert in patent cases in the United States courts. He says the first working machine of Well-man’s which he saw was in 1853. He is asked to look at the second model made by him, marked “George Wellman, Lowell, Massachusetts,” and state the differences, if any, between that and the first model made by him. In answer he states very'fully and minutely the differences, which are several. The length of the statement is too great to admit of being here recited. It shows, however, that by the change, or the new organized and combined arrangement, in addition to the other differences in the present model, the motion is communicated to the stripping shaft and cams by means of a chain belt and gear pulleys, thereby dispensing with those levers and couplings or tubes. The shaft, also, on the second model which communicates the motion to the stripping-shaft and cams with the gear pulleys is operated by a shaft lying directly above it, on which is a gear, with a portion of the teeth removed. This gear comes in contact with a pinion on the shaft with the gear pulley, giving it sufficient rotary motion to turn the stripping shaft and cams one entire revolution on their axis. The shaft with the gear pulley and pinion then remain at rest until the gear with a portion of the cogs removed again comes in contact with the same. There is still another difference: at the top of said upright shaft, instead of a worm and gear, as in the first model, the motion is communicated to the stripping shaft and cams by means of bevel gears. This witness states also several important changes of a similar nature in Well-
David G. Bean describes the difference thus: “In place of the worm gear, as seen in the model present, matching into the segment, is a pinion gear; the segment in the model, instead of teeth upon its periphery, has mangle pins; instead of the upright shaft from the mangle wheel in the model sent, the upper shaft has a chain belt to the main shaft; the cams, which upon the model sent are above the card, are placed upon the main shaft in the model; the lever that does the stripping, the end of which plays in the cams in the present model, is in the model sent hung on the curve about three or four inches from the main shaft; the lifting rod, which in the present model is outside of the cam, is in the model sent inside the cam; the strip card, which in the present model hangs upon a stand screwed on the segment arm, in the model sent is attached to an arm playing into the cam below.”
Hinckley testifies to the same effect.
James F. Burgess, another witness for Well-man, says that he worked on the machines of Wellman; that he began on the 25th of April, 1853; that whilst so at work, about the end of June, 1853, Wellman told him that he was going to do away with the mangle wheel, and was going to use the segment ás a mangle, thereby dispensing with a shaft and two large spur gears, “which I did on the last cards I built for him under his direction.” In conformity to which principles Wellman’s proof shows that he constructed various working machines which operated successfully in the years 1853 and 1S54, and they were so placed in his last machine by Burgess.
In the absence of all opposing evidence the aforegoing proof must be deemed fully sufficient to establish the claim on the part of Wellman for the important improved invention, as stated by him in his specification. It appears that a number of machines have been constructed by him according to those principles, and have produced a perfect result as desired. This invention, in an organized combined state, shows the lifting and stripping cams placed on the main shaft of the card cylinder, the mangle pins in the segment on the lower end of the vibrating-arm (the mangle wheel is dispensed with and the segment used as a mangle, whereby a new element or constituent feature is substituted in the place of a mangle wheel and two large spur gears), by which means the object is attained, and much better by reason of an aceellerated motion produced in the lifting and stripping. The construction is less complicated and more simple. By such an arrangement of the parts, and dispensing with costly machinery, the mode of operation becomes much more economical and cheaper. This arrangement, by which the omission of a part of the machinery previously used and considered essential in the construction of the machine, under the circumstances just stated, constitutes of itself sufficient patentable invention.
The proof further is that this improved feature is exhibited by the drawing made in April or May, 1852. That drawing was made by. M. C. Bryant, and it is contended that the particular improved invention was his, and not Wellman’s. Bryant himself does not say so. He says, as before stated, that he made the drawing for Wellman, and that whatever appears on the face of it was made at the same time or a few days after. He states, as already noticed, what it represents, and of his having seen the model of Wellman shown to him; and the information that he made the drawing from; and that the modification which he proposed was assented to by Wellman. He had seen a machine built by or for Mr. Well-man which did not essentially differ from the model in respect to its being moved by means of an intermittent-moving pinion engaging with pins on a mangle wheel. Wellman offered to pay him for the modification and drawing which he had made for him, but he refused to take any pay, considering the trouble on his part of making the change of little importance. The change was in respect to the top-hamper, which he thought might be easily reduced. He explains more particularly what he means by the top-hamper. But the general idea which embraced the principle of the improvement, I think, appears to have been conceived by Wellman, and I take the rule to be this: If the employer conceives the result embraced in the invention, or the general idea of a machine upon a particular principle, and in order to carry his conception into effect, it is necessary to employ manual dexterity, or even inventive skill, in the mechanical details and arrangements requisite for carrying out the original conception; in such cases the employer will be the inventor, and the servant will be a mere instrument through which he realizes his idea.
But it is further contended that Wellman did not approve of the modification as to the arrangemnt of cams on the main shaft. The evidence, I think, does not warrant this conclusion, as it is shown that he did after a time construct machines upon precisely the same principles, and that his reasons for not applying that arrangement to old cards was the want of a sufficient length of shaft and the practical difficulty of keeping the machinery clean; so that the inference drawn from that fact is unfounded.
If the view thus taken be correct, Wellman conceived the idea of the improvement, and practically reduced it, according to the established rule of law, in April. 1S52.
The proof to sustain Mr. Blood’s claim as prior inventor will be next considered. He supposes that his evidence establishes the date of his invention, as exhibited by his model and drawings, as early as March, lSifi; and if he is right about this, he must unquestionably be considered the prior and original inventor on
With the aforegoing views, it becomes unnecessary to give any opinion on the question of the admissibility of the copies of drawings given in evidence.
With respect to Woodman’s claim, I need say but little. He has his patent, and cannot be affected in this mode of proceeding. I am satisfied that there are substantial differences between his invention and that of Wellman’s
Case-law data current through December 31, 2025. Source: CourtListener bulk data.